What to Do When Your Furnace Drain Pipe Is Clogged?

What to Do When Your Furnace Drain Pipe Is Clogged? 

A clogged drain pipe in your furnace may become evident only when you notice a pool of water around the appliance. This is quite a common problem. Ignore it and it can cause big trouble for your home and prevent your furnace from working at peak efficiency. The leakage can cause damage to your floors, walls, other equipment in the area. This is why you need to call for expert help immediately to check out and curb problems with your furnace drain. Vancouver furnace repair specialists from Hillcrest Plumbing are just a phone call away.

How to Tell If You Have Furnace Leak Problems 

Before you call in for furnace repair in Vancouver, you can verify if a leak is indeed the problem. Remember that, with a high-efficiency furnace, condensation is bound to occur so you need to ensure that any dampness you see is not a result of condensation. Open the access panel of the furnace and check if there is a water trail leading to the evaporator coil. If there is water, your drainpipe is probably blocked. Ideally, this water should be channeled outside the unit through the drain pipe.

DIY Ideas To Fix Furnace Leaks 

You get the best outcomes when you call in experienced professionals to check out your furnace’s drainage. Vancouver homeowners who like to try their hand at DIY solutions can attempt to clean out the drain using these ideas:

• To clean out the drain pipe from the outside, use a vacuum cleaner to suck out the accumulated debris. Place the hose over the drain pipe and turn on the cleaner.

• If you want to clear out the line from the inside of the unit, use the blower function so that the debris is pushed out into the drain channel. You can also direct a stream of water at high pressure to get the job done this way.

The very best thing to do is to carry out regular maintenance on the furnace unit so that the drains don’t get clogged at all. Remember, that you should also clean the condensation tray periodically to prevent problems. Dirty filters also result in clogged drain pipes because the incoming dirt and debris are sticking to the evaporator coils, where it then ends up in the drainage. Vancouver homeowners should call in a trusted professional for regular tuning and maintenance to keep these problems at bay.

Remember that a poorly maintained furnace uses up more power but offers less performance. If you want efficient heating and keep your utility bills within reasonable limits, you should call Hillcrest Plumbing and Heating for your furnace maintenance in Vancouver.